Bewakingscamera Pelco CC3770UH-6X

Categories: Beveiliging

De CC3770 series camera is een dag/nacht, kleuren/zwart-wit camera van ultra hoge resolutie met een 1/3-inch CCD imager. De camera heeft een direct drive/auto iris lens connector en adjustable back focus. De camera accepteerd C en CS lenzen.

 

Gebruikt/getest
3 maanden garantie
Zonder lens

 

SPECIFICATIONS

GENERAL

Day/Night Operation

Day Infrared (IR) cut filter

Night BK-7 glass with same optical displacement

as day filter

Imaging Device 1/3-inch interline transfer CCD

Picture Elements

NTSC 768 (H) x 494 (V)

PAL 752 (H) x 582 (V)

Sensing Area 6 mm diagonal

Scanning System

NTSC 525 lines, 21 interlace

PAL 625 lines, 21 interlace

Synchronization System AC line lock/internal

Horizontal Resolution 540 TV lines (color); 530 TV lines (B-W)

Iris Control Selectable on/off

Electronic Shutter Range

NTSC 1/60-1/100,000 second

PAL 1/50-1/100,000 second

Auto Iris Lens Type DC/video drive (autosensing)

Minimum Illumination 0.7 lux, F1.2, 40 IRE, AGC on, 75% reflectance

(color mode)

0.09 lux, F1.2, 40 IRE, AGC on,

75% reflectance (B-W mode)

Filter Switching Threshold

Dusk 0.7 lux

Dark 0.3 lux

Signal to Noise Ratio >50 dB

Vertical Phase Adjustable ±180°

Automatic Gain Control On/off switchable

Electronic Shutter Control On/off switchable

Backlight Compensation On/off switchable

Flickerless Mode On/off switchable

Internal Sync On/off switchable

Auto White Balance On/off switchable

D/N Dusk Dark On/off switchable

Signal Processing Digital Signal Processing (DSP)

Video Output 1 Vp-p, 75 ohms

Auto White Balance Range 2,500° to 9,500°K

Gamma Correction 0.45

ELECTRICAL

Power Requirements

CC3770UH-6/ -6X 24-28 VAC ±10% or 12-36 VDC ±10%

CC3770UH-7/ -7X 110-240 VAC ±10%

Power Consumption 6 watts nominal (8 watts during filter

switching)

Power Connector

CC3770UH-6/ -6X 2-pin terminal strip, RJ45-10 connector

CC3770UH-7/ -7X Integral power cable

Video Connector BNC or RJ45-10

Service Connector 2.5 mm jack for optional ICS090-SC service/

monitor cable (compatible with any standard

monitor BNC connector)

UTP Connector RJ45-10

Lens Jack 4-pin connector (miniature square)

Input for Remote

Day/Night Switching RJ45-10 or 2-pin terminal strip

MECHANICAL

Lens Mount C/CS mount (adjustable)

Camera Mount 1/4-inch UNC-20 screw, top or bottom of

camera housing